| FULL HEAT CONTINOUS FLOW DRYERS |
| SQ D Series Full Heat - Single Zone |
 |
| CONTINUOUS FLOW DRYERS WITH LOUVERS |
|
SQ E Series Modified Full Heat - Single Zone or Two Zone Pressure Heat / Pressure Cool Pressure Heat / Vacuum Cool |
 |
| FULL HEAT CONTINOUS FLOW DRYERS USING TWO TEMPERATURE ZONES |
|
SQ M Series Modified Full Heat - Single Zone or Two Zone Pressure Heat / Pressure Cool |
 |
| CONTINUOUS FLOW DRYERS WITH LOUVERS AND HOT AIR RETURN DUCTS |
|
SQ A Series Modified Full Heat - Single Zone or Two-Zone Pressure Heat / Pressure Cool Pressure Heat / Vacuum Cool Hot Air Return Ducts |
 |
Unique EVENFLO® Unloading System
Is Part of Brock’s Difference by Design
- Gentle handling of the grain using the EVENFLO® System’s efficient, slow-moving drag-style conveyor.
- Patented conveyor unloading system replaces auger and metering rolls.
- Even unloading of grain columns with improved ability to pass most debris.
- More durable and safer to operate than auger systems.
Take-up adjustments are located at both ends of the conveyer. This feature helps you to easily adjust the chain if needed.
The EVENFLO® System’s uniform unloading of grain dryer columns provides consistent drying results. Slow, straight-line movement of grain is also ideal for sensor accuracy in monitoring exit moisture content.
 |
How Does the Brock EVENFLO® Dryer Unloading System Work?
|
|
Clean up between crops or at the end of the drying season is easy:
|
|
 |
Low horsepower, variable speed AC motor is used to economically power the EVENFLO System. |
|
Moisture Equalizers Patented Brock MOISTURE EQUALIZER® System maintains grain quality by moving the hottest and driest grain through the dryer faster for greater drying uniformity and less over-drying. |
 |
 |
Stainless Steel Outer Skins Stainless steel outer 18-gauge perforated skins are standard on all SUPERB ENERGY MISER® SQ Series Dryers for a lifetime of satisfaction. With proper care and maintenance, stainless steel perforated skins offer long life and high asset retention value |
|
Vertical Access Plenum Door A 42- x 22-inch (107- x 56-cm) vertical access door is provided for easy access to the dryer’s plenum areas. A door safety switch is standard on all SUPERB ENERGY MISER Low-Profile Dryers. If the door is opened during operation, the dryer will shut down. |
 |
 |
Efficient Full Flame-Wall Burner Brock’s full flame-wall burner with stainless steel baffles provides a generous square footage of flame surface and distributes heat evenly to all the grain columns. Using a shorter flame, this fuel-efficient Brock burner burns cleanly and provides uniform plenum temperatures to help maintain top grain quality. |
|
Unobstructed Heat Movement The SQ Series Dryer’s unique built-in vaporizer is located out of the burner’s airflow to ensure uniform heat distribution. |
 |
 |
Perforated Wet Garner Bin The drying process starts in the perforated wet garner bin. Heated air is routed from the dryer through this temporary grain holding area to pre-heat and begin drying the wet grain. |
|
Variable Width Grain Column A narrower upper grain column allows moisture saturated drying air to escape. This variable width design dries more effectively than a larger holding capacity with a wider grain column. |
 |
|
|
Easy Access for Service Access entrances at both the top and bottom of the dryer make it easy to service industrial grade plumbing, burner, fan, motor, bearings, belts, linear limits, and the front of the unloading system. |
|
Upper Service Access Area |
Lower Service Access Area |
|
Super Quiet Drying The SQ Series Dryers use a super quiet double-width, double-inlet centrifugal blower as standard equipment. This blower provides maximum airflow and efficiency while minimizing sound levels. |
 |
 |
Cool Air Control Adjustable cooling louvers help control grain temperature by regulating the amount of cool air used for vacuum-cooling mode. QUANTUM® Controller A Proven Record Of Reliability Brock’s advanced QUANTUM® Dryer Controller option offers total dryer management through a moisture-based controller popular for farm and commercial use:
|
SPECTRUM® Controller
Brock’s SPECTRUM® Dryer Controller is a temperature-based controller and is the standard dryer controller for Brock’s SQ Dryer Series. It is mounted in a lighted, industrial-grade control panel that is weather- and dust-proof and has dual doors.
The SPECTRUM® Controller is also easily upgradable to convert it to the more full-featured QUANTUM® Dryer Controller.
Links
Brochure (pdf)
Spectrum Controller (pdf)
Quantum Controller (pdf)
Web Based Quantum Monitor (pdf)
Specifications & Capacities (pdf)